Manual Approval process for BYOIP (Bring Your Own IP)

It is possible to bring your own IP addresses to our infrastructure and use them with Bare Metal and Cloud Hosting servers. Here is how it’s done:

STEP 1. Access Terminal -> IP Address Market -> IPAM and click on BYOIP button.

STEP 2. Choose between two manual approval options.

ROA – by choosing this option, the system will check Route Origin Authorisation of your IP range. ROA should be created beforehand for our ASN 61317.

MA – if manual approval is chosen, the system will send you an email to your abuse-c email. Make sure that your abuse contact is valid because you will need to manually verify the BYOIP process.

Keep in mind that if you have multiple abuse contacts set, you will receive a letter to each one of them, however, only one must be approved.

STEP 3. After validating your IP addresses to be used in our infrastructure, select ‘Confirm’ to finish up the process.

You will now be able to see your subnet in Terminal -> IP Address Market -> IPAM

If any further questions arise, make sure to contact our customer support team at support@heficed.com or submit a Ticket.

Was this article helpful?

Still need help?

Heficed Slack Community

Get involved in Heficed Slack community. Get updates, ask questions, connect with peers.

Heficed Slack

Need support?

If you need any further help, don't hesitate to send a support request to our support team.